Then You can only try to downgrade and redo result file !
Regards
in this list:
https://download.lenovo.com/ibmdl/pub/pc...uj19us.txt
there are so many versions prior to 2.25, but are confused about which version to install ...
in a portion of the notes it says:
(With the Hynix on-board memory installed: )
System cannot be downgraded BIOS to the version before 2.25.
(With the Samsung on-board memory installed: )
System cannot be updated/downgraded BIOS to the version before 2.23.
I'm not finding anything about Hynix or Samsung on-board memory installed...
can you please advise me?
Manufacturer: Lenovo
Model: T440s
BIOS Revision: 2.30 (GJET80WW)
BIOS Type: UEFI
BIOS Download: Page(
http://support.lenovo.com/us/en/products...kpad-t440s) Direct (
https://download.lenovo.com/ibmdl/pub/pc...uj19us.iso)
The support page only has the updated BIOS (2.33) and not the current one I'm using.
The current WWAN installed (and approved) is a Intel 7260 BT ACBGN. However I plan to install a Azurewave AW-CE123H, which is not approved.
I'm only have OSX installed so if I need to copy the BIOS will I have to do it with a different tool?
Hello BDMaster,
I am requesting for your help to remove the whitelist from my Lenovo T440 bios. I have read my bios chip using an SPI programmer and my BIN file is linked here:
http://rghost.net/8HmwlyHyf
Please help me to modify my BIN file. If this works, you can look forward to my donation. Thank you very much!
Good morning BDMaster !
I am a neophyte , but I will try to study and if it is not too difficult I will buy SPI programmer!
Hello leny!
to read and to flash the bios you unsoldered something , or just use the clip ?
Thank you guys!
(06-27-2015, 11:15 PM)leny Wrote: [ -> ]Hello BDMaster,
I am requesting for your help to remove the whitelist from my Lenovo T440 bios. I have read my bios chip using an SPI programmer and my BIN file is linked here:
http://rghost.net/8HmwlyHyf
Please help me to modify my BIN file. If this works, you can look forward to my donation. Thank you very much!
Ok I will reply quickly and You can use this tool meanwhile . . .
use this tool run It as Admin and upload here the result fle :
http://rghost.net/7xBfRPCvp
let me know
Here your firmware patched :
http://rghost.net/6ZJVMwTBp
let me know
Regards
Donate to me for my work and time . . . look into my Signature
Hello BDMaster, thanks! I have a question. Why do I need to run the backup_tools.exe? What does it do? Can I just flash the patched file using my spi programmer without using backup_tools.exe?
Pexta, I tried using the clip but it did not work. The read is unstable. I had to desolder the chip.