Forum RSS Feed Follow @ Twitter Follow On Facebook

Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[-]
Welcome
You have to register before you can post on our site.

Username:


Password:





[-]
Latest Threads
Intel DG35EC & Xeon L5410
Last Post: yuri622302
Today 01:39 AM
» Replies: 15
» Views: 0
HP ProOne 400 G4 23.8-inch ADD SUPPORTED...
Last Post: bugattiveyron2009
Yesterday 10:48 PM
» Replies: 2
» Views: 0
[REQUEST] Acer Aspire 8930(G) BIOS Unloc...
Last Post: mak11
Yesterday 05:56 PM
» Replies: 58
» Views: 28945
[Request] HP TX2-1000 Series - Unlock hi...
Last Post: e_favero
Yesterday 09:56 AM
» Replies: 8
» Views: 0
Acer ECS G41T-AD Ver. 1.0 Xeon
Last Post: DeathBringer
02-18-2024 02:22 PM
» Replies: 1
» Views: 0
[Request] EVOO Gaming 15 (EG-LP5-BK) BIO...
Last Post: ashton4life12
02-18-2024 11:15 AM
» Replies: 51
» Views: 7049
Dell Alienware Aurora R4 & Ivy Bridge-E
Last Post: aspirevvv
02-18-2024 12:56 AM
» Replies: 41
» Views: 12382
[REQUEST] Lenovo B590 (H1ETxxWW) Whiteli...
Last Post: sasaittvan
02-17-2024 03:57 PM
» Replies: 921
» Views: 272382
Asus P5G41C-M LX Unlock CPU Voltage Cont...
Last Post: Maxinator500
02-16-2024 10:48 PM
» Replies: 13
» Views: 0
[Request] Unlocking Hidden Section's On ...
Last Post: manfred788
02-15-2024 06:40 PM
» Replies: 6
» Views: 1488
GA-Z68AP-D3 mod to UEFI BIOS
Last Post: jao6622
02-15-2024 02:12 PM
» Replies: 0
» Views: 0
Lenovo X250 WAN whitelist remove
Last Post: Dudu2002
02-15-2024 06:39 AM
» Replies: 11
» Views: 146
[REQUEST] Lenovo IdeaPad U310 & U410 (65...
Last Post: Dudu2002
02-14-2024 01:54 PM
» Replies: 1766
» Views: 351120
[REQUEST] Lenovo ThinkPad T560 WWAN Whit...
Last Post: starslab
02-13-2024 10:35 AM
» Replies: 8
» Views: 0
[REQ]Microcode for RF511
Last Post: qwerty01
02-13-2024 02:36 AM
» Replies: 8
» Views: 0
BIOS MOD for ASUS ROG Strix Z690-E to su...
Last Post: easygoer
02-12-2024 08:13 PM
» Replies: 0
» Views: 0
[REQUEST] Bios Unlock Asus ROG GL552VW
Last Post: retryer
02-12-2024 05:06 PM
» Replies: 122
» Views: 59313
What's the easiest way to read/write to ...
Last Post: Hentrox
02-11-2024 08:33 PM
» Replies: 0
» Views: 0
[REQUEST] Lenovo IdeaPad Z480 & Z580 (5F...
Last Post: Racer540
02-11-2024 02:47 PM
» Replies: 565
» Views: 137922
XPS 13 9343
Last Post: ibrahim02
02-11-2024 09:34 AM
» Replies: 0
» Views: 0

Asus Rampage III Gene OROM Mod
#21
(02-03-2016, 02:01 AM)Torpis Wrote: Intel SATA and NIC working fine, I don't use the SATA3 due to the fact its slower than the SATA2 on this board (unless the new bios fixes that).

the new firmware does not make the Marvel chip any faster.  The Marvell SATA3 is a first gen chip and falls short when working with faster SSD drives.  But for standard platter/rotational drives, the Marvel chip is plenty fast.  I personally get better benchmarks on my WD Black drives via the Marvell controller over the Intel. For SSD, yes.. you are better off using the Intel SATA2 ports.
find
quote
#22
Yeah I didn't think it would due to the 1x PCI-e lane, I didn't know about the platter drive though so might be moving my HDD over onto that controller.
find
quote
#23
(02-01-2016, 01:55 PM)pir8man Wrote:
(01-21-2016, 06:23 PM)nicke85 Wrote: any newer bios update for Rampage III Gene ? Warm regards

I took pity on you R3G owners and created an updated BIOS from ZioMod S10.

thank you pir8man for bios update, currently don't have any 1366 cpu
have been tried to sell pc in parts but have still R3G and now when X58 is not dead platform have been ordered X5690.
Hope it will work. Regards
find
quote
#24
The X56xx brothers have QPI path enabled to talk to 2nd cpu. Which is useless on this board, the W36xx lineup is cheaper and better suited. I just installed W3680 on my R3E and it's a dream! I highly recommend the XEON W3670 or W3680 for these boards. Both are great bang for the buck and overclock well.
find
quote
#25
Thumbs Up 
(02-12-2016, 11:33 PM)pir8man Wrote: The X56xx brothers have QPI path enabled to talk to 2nd cpu. Which is useless on this board, the W36xx lineup is cheaper and better suited. I just installed W3680 on my R3E and it's a dream! I highly recommend the XEON W3670 or W3680 for these boards. Both are great bang for the buck and overclock well.

I have got W3690 for my R3G and have tested it with lastest bios update.
It seems that it work perfect!
thank you pir8man
find
quote
#26
I really appreciate this forum! great work! i'm at the moment using the ZioMod 1003_S10 bios version on my Rampage III Gene, and it works smoothly!! Smile
I'm just wondering if there any chance to get bluetooth (from usb dongle or pcie board) working on post, to access bios with wireless keyboard, through a bios mod... please don't get angry is i've said a kind of bullsh1t.. i'm not an expert at all! Big Grin
find
quote
#27
(02-01-2016, 01:55 PM)pir8man Wrote:
(01-21-2016, 06:23 PM)nicke85 Wrote: any newer bios update for Rampage III Gene ? Warm regards

I took pity on you R3G owners and created an updated BIOS from ZioMod S10.

S18 with new Intel ICH10R SATA RAID Controller: v13.5.0.2164
    Marvell 91xx SATA 6G Controller - Bios : v1.0.0.1038
    Intel 82567V-2 Gigabit Network: v1.5.43

* S18T file has TRIM support for SSD RAID0 users.  SSD TRIM for AHCI is supported under both versions.

** I cannot test these as I have a different MOBO.  Please PM me for any assistance.
I am using the S18T rom and everything seems to be running well. The one issue i am having is CPU Z does not recognize the processor I am using. I am using a Xeon X5687 (4c/8t 3.6) CPU Z reads is up as Intel Xeon X 000 @ 3.6, is this fixable with a microcode update?
find
quote
#28
(06-27-2016, 08:35 PM)PrestonYoungsley Wrote:
(02-01-2016, 01:55 PM)pir8man Wrote:
(01-21-2016, 06:23 PM)nicke85 Wrote: any newer bios update for Rampage III Gene ? Warm regards

I took pity on you R3G owners and created an updated BIOS from ZioMod S10.

S18 with new Intel ICH10R SATA RAID Controller: v13.5.0.2164
    Marvell 91xx SATA 6G Controller - Bios : v1.0.0.1038
    Intel 82567V-2 Gigabit Network: v1.5.43

* S18T file has TRIM support for SSD RAID0 users.  SSD TRIM for AHCI is supported under both versions.

** I cannot test these as I have a different MOBO.  Please PM me for any assistance.
I am using the S18T rom and everything seems to be running well. The one issue i am having is CPU Z does not recognize the processor I am using. I am using a Xeon X5687 (4c/8t 3.6) CPU Z reads is up as Intel Xeon X 000 @ 3.6, is this fixable with a microcode update?

That has nothing to do with the Board or BIOS version.  That is because you are running an ES (Engineering Sample) CPU.  These always appear as ID 000, so that they are not confused with retail versions of the same processor.  I had the same on my i7-965 (ES), the problem disappeared when I upgraded to a retail XEON CPU.
find
quote
#29
https://mega.nz/#!YjIAEJLS!DS0X72LcI1p5x...ahSb4fgckM

s18t version with updated cpu microcode. No changes at all, but if someone wants to flash, you have a chance right now.
find
quote
#30
(06-27-2016, 08:35 PM)PrestonYoungsley Wrote:
(02-01-2016, 01:55 PM)pir8man Wrote:
(01-21-2016, 06:23 PM)nicke85 Wrote: any newer bios update for Rampage III Gene ? Warm regards

I took pity on you R3G owners and created an updated BIOS from ZioMod S10.

S18 with new Intel ICH10R SATA RAID Controller: v13.5.0.2164
    Marvell 91xx SATA 6G Controller - Bios : v1.0.0.1038
    Intel 82567V-2 Gigabit Network: v1.5.43

* S18T file has TRIM support for SSD RAID0 users.  SSD TRIM for AHCI is supported under both versions.

** I cannot test these as I have a different MOBO.  Please PM me for any assistance.
I am using the S18T rom and everything seems to be running well. The one issue i am having is CPU Z does not recognize the processor I am using. I am using a Xeon X5687 (4c/8t 3.6) CPU Z reads is up as Intel Xeon X 000 @ 3.6, is this fixable with a microcode update?

2d performance booster should be disabled in the bios.
find
quote


Forum Jump:


Users browsing this thread: 1 Guest(s)