Forum RSS Feed Follow @ Twitter Follow On Facebook

Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[-]
Welcome
You have to register before you can post on our site.

Username:


Password:





[-]
Latest Threads
[REQUEST] ThinkPad T14 Gen1 Intel BIOS W...
Last Post: Ibm38729
Today 03:29 PM
» Replies: 1
» Views: 202
[REQUEST] HP ProBook 4535s Whitelist Rem...
Last Post: matxav
Today 01:35 PM
» Replies: 5
» Views: 3425
[HELP] BIOS modding to change soldered R...
Last Post: F-18
Today 12:44 PM
» Replies: 0
» Views: 51
Cannot repair or reset bios Lenovo G500 ...
Last Post: POPKAPOPI2222
Today 12:26 PM
» Replies: 0
» Views: 49
[REQUEST] Unlocked ASUS H81M-E/M52AD/DP_...
Last Post: CertifiedCosmos
Today 08:50 AM
» Replies: 1
» Views: 288
[REQUEST] Lenovo IdeaPad S540 (GPETxxWW)...
Last Post: loginnow
Today 03:39 AM
» Replies: 46
» Views: 16087
[REQUEST] Lenovo IdeaPad U310 & U410 (65...
Last Post: Dudu2002
Today 03:25 AM
» Replies: 1768
» Views: 381599
[REQUEST] Lenovo G500 (78CNxxWW) BIOS Un...
Last Post: Dudu2002
Today 03:20 AM
» Replies: 280
» Views: 124764
Fujitsu Esprimo P5710 - unlock [REQUEST]
Last Post: monkeywrench
05-05-2024 12:30 PM
» Replies: 34
» Views: 760
Lenovo Z50-70: CPU update
Last Post: PedroFX
05-04-2024 07:20 PM
» Replies: 6
» Views: 207
My Gateway NV57h has an ACER in BIOS - c...
Last Post: drmrsolds
05-04-2024 05:42 PM
» Replies: 1
» Views: 2083
Z97-PRO(Wi-Fi ac)/USB 3.1
Last Post: Jedrek
05-04-2024 09:49 AM
» Replies: 4
» Views: 2307
[Request] Acer Aspire 3050 unlocked BIOS
Last Post: prowindows62
05-04-2024 07:43 AM
» Replies: 0
» Views: 148
HP H-IG41-uATX 45nm microcode update LGA...
Last Post: goldenhill
05-04-2024 04:49 AM
» Replies: 58
» Views: 56878
Asus h61m-d & xeon e3-1265l v2
Last Post: DeathBringer
05-03-2024 04:28 PM
» Replies: 3
» Views: 249
[REQUEST] - Acer Swift 3 SF314-41G bios ...
Last Post: ersan
05-03-2024 03:03 PM
» Replies: 1
» Views: 196
[REQUEST] Lenovo G780 advanced menu
Last Post: Dudu2002
05-03-2024 09:41 AM
» Replies: 43
» Views: 17178
[REQUEST] Lenovo Ideapad 100-14IBD & 100...
Last Post: Dudu2002
05-03-2024 03:48 AM
» Replies: 15
» Views: 7161
HP Pro 3500: CPU Upgrade
Last Post: DeathBringer
05-03-2024 12:13 AM
» Replies: 20
» Views: 4634
[READ FIRST] Access Advanced settings th...
Last Post: Klinzah
05-02-2024 05:11 PM
» Replies: 420
» Views: 570004

[REQUEST] Acer VN7-792G BIOS Unlock
#11
(09-13-2016, 04:26 PM)Dudu2002 Wrote: Hi
ONLY SPI programmer+SOIC8 clips

What u mean with that? I dont understand u?
find
quote
#12
Hello Vodek.
Will your method work on a vn7-792g laptop. I would like to use win 7 on this machine
but have no audio available, which may be accessible from the advance menu.
Also to choose which graphics is default.
I have the latest BIOS v1.09 installed.
Is this possible,
Many thanks.
find
quote
#13
(11-13-2016, 05:59 AM)Saddle Wrote: Will your method work on a vn7-792g laptop. I would like to use win 7 on this machine
but have no audio available, which may be accessible from the advance menu.
Also to choose which graphics is default.
NO
Bios mod can be flashed using SPI-programmer+SOIC8 clip only
find
quote
#14
(11-13-2016, 06:23 AM)Dudu2002 Wrote:
(11-13-2016, 05:59 AM)Saddle Wrote: Will your method work on a vn7-792g laptop. I would like to use win 7 on this machine
but have no audio available, which may be accessible from the advance menu.
Also to choose which graphics is default.
NO
Bios mod can be flashed using SPI-programmer+SOIC8 clip only

Thanks for your reply.
What would the procedure be for this, please ?
find
quote
#15
(11-13-2016, 01:37 PM)Saddle Wrote:
(11-13-2016, 06:23 AM)Dudu2002 Wrote:
(11-13-2016, 05:59 AM)Saddle Wrote: Will your method work on a vn7-792g laptop. I would like to use win 7 on this machine
but have no audio available, which may be accessible from the advance menu.
Also to choose which graphics is default.
NO
Bios mod can be flashed using SPI-programmer+SOIC8 clip only

Thanks for your reply.
What would the procedure be for this, please ?

In-short, you use a programmer (can be a USB programmer connected to another computer or the GPIO pins on a Raspberry Pi) and flash a custom BIOS directly to the BIOS chip on the laptop. The programmer is connected to the BIOS chip via a SOIC clip.

Here's a (pretty unexplained) video of the process: https://youtu.be/W8hhMLZwghs (shows the opening of the laptop, attaching the SOIC clip, the long flash writing process (a few mins), and then the end shows the Terminal window for the commands and a close-up of the wires and SOIC clip)

I've done this on a VN7-572G with a Raspberry Pi and Pomona 5250 SOIC clip. Assuming the BIOS chip on the VN7-791G has the same (MX25L6405D) or similar BIOS chip, the same SOIC clip should work.

As for the programmer, a Raspberry Pi and flashrom worked fine for the MX25L6405D my 572G had. To figure out what chip your laptop has, you'll have to look at the model number on the chip itself (rip the keyboard off, look for a small 8-pin chip; there might be 3 of them; on a 572G the chip was towards the middle near the fan). If you're using a RPi, you'll need to manually compile Flashrom if you're using Raspbian.

As for pin layout and what wires go where between the chip and programmer, I had to look at some guide for another chip, and then compare it to the data sheet for my chip (it happened to match).

[Image: 820LcDeSURqbEMgv.jpg]
find
quote
#16
(11-13-2016, 08:39 PM)espionage724 Wrote:
(11-13-2016, 01:37 PM)Saddle Wrote:
(11-13-2016, 06:23 AM)Dudu2002 Wrote:
(11-13-2016, 05:59 AM)Saddle Wrote: Will your method work on a vn7-792g laptop. I would like to use win 7 on this machine
but have no audio available, which may be accessible from the advance menu.
Also to choose which graphics is default.
NO
Bios mod can be flashed using SPI-programmer+SOIC8 clip only

Thanks for your reply.
What would the procedure be for this, please ?

In-short, you use a programmer (can be a USB programmer connected to another computer or the GPIO pins on a Raspberry Pi) and flash a custom BIOS directly to the BIOS chip on the laptop. The programmer is connected to the BIOS chip via a SOIC clip.

Here's a (pretty unexplained) video of the process: https://youtu.be/W8hhMLZwghs (shows the opening of the laptop, attaching the SOIC clip, the long flash writing process (a few mins), and then the end shows the Terminal window for the commands and a close-up of the wires and SOIC clip)

I've done this on a VN7-572G with a Raspberry Pi and Pomona 5250 SOIC clip. Assuming the BIOS chip on the VN7-791G has the same (MX25L6405D) or similar BIOS chip, the same SOIC clip should work.

As for the programmer, a Raspberry Pi and flashrom worked fine for the MX25L6405D my 572G had. To figure out what chip your laptop has, you'll have to look at the model number on the chip itself (rip the keyboard off, look for a small 8-pin chip; there might be 3 of them; on a 572G the chip was towards the middle near the fan). If you're using a RPi, you'll need to manually compile Flashrom if you're using Raspbian.

As for pin layout and what wires go where between the chip and programmer, I had to look at some guide for another chip, and then compare it to the data sheet for my chip (it happened to match).
Thanks for that, he doesn't say much !!!
I think I'll use a SB audio stick for now.

One thing I've noticed using the Intel system Utility is that disabling SECURE BOOT switches
the BIOS to legacy mode, even if UEFI is selected. I scanned with and without SECURE BOOT to
confirm this. I guess that's why I couldn't boot with a UEFI USB to install the OS.
This might be useful for someome.

Thanks for your help.
find
quote
#17
[attachment=11429]
(11-13-2016, 08:39 PM)espionage724 Wrote:
(11-13-2016, 01:37 PM)Saddle Wrote:
(11-13-2016, 06:23 AM)Dudu2002 Wrote:
(11-13-2016, 05:59 AM)Saddle Wrote: Will your method work on a vn7-792g laptop. I would like to use win 7 on this machine
but have no audio available, which may be accessible from the advance menu.
Also to choose which graphics is default.
NO
Bios mod can be flashed using SPI-programmer+SOIC8 clip only

Thanks for your reply.
What would the procedure be for this, please ?

In-short, you use a programmer (can be a USB programmer connected to another computer or the GPIO pins on a Raspberry Pi) and flash a custom BIOS directly to the BIOS chip on the laptop. The programmer is connected to the BIOS chip via a SOIC clip.

Here's a (pretty unexplained) video of the process: https://youtu.be/W8hhMLZwghs (shows the opening of the laptop, attaching the SOIC clip, the long flash writing process (a few mins), and then the end shows the Terminal window for the commands and a close-up of the wires and SOIC clip)

I've done this on a VN7-572G with a Raspberry Pi and Pomona 5250 SOIC clip. Assuming the BIOS chip on the VN7-791G has the same (MX25L6405D) or similar BIOS chip, the same SOIC clip should work.

As for the programmer, a Raspberry Pi and flashrom worked fine for the MX25L6405D my 572G had. To figure out what chip your laptop has, you'll have to look at the model number on the chip itself (rip the keyboard off, look for a small 8-pin chip; there might be 3 of them; on a 572G the chip was towards the middle near the fan). If you're using a RPi, you'll need to manually compile Flashrom if you're using Raspbian.

As for pin layout and what wires go where between the chip and programmer, I had to look at some guide for another chip, and then compare it to the data sheet for my chip (it happened to match).

I notice that the problem seems to be with the VN7-**2G series notebooks, so I had a look at
the difference between the **2G and the **1G (which works).
I found that in the **2G series, there are 3 instances of 0x258, but on the **1G there is only 1.
That being the case, the Efishell command would never work on the**2G series as it will
try and alter the first instance and fail.
If there is a command to address only the second instance, then it may work without the
need for hardware. I attach the text files of the 3 laptops in the thread.
Many Thanks again.


Attached Files
.txt   591G.txt (Size: 379 bytes / Downloads: 37)
.txt   792G.txt (Size: 603 bytes / Downloads: 30)
find
quote
#18
Thumbs Up 
The model is the Acer Aspire V Nitro VN7-792G, here's the link to the Bios file:

https://global-download.acer.com/GDFiles...09_A_A.zip

Attached is a screenshot of the currently available Bios options.

I'm aware that I'll need to use a clip and flasher to make this happen and willing to try it with a modified Bios.

Thanks in advance
find
quote
#19
Good Day.

I have an Aspire VN7-792G-78G4 Nitro black edition with intel i7-6700HQ and Nvidia gtx 960m, Currently running latest bios version 1.09 from Acer website, I would like to unlock advanced menu on this laptop bios,

I would really appreciate if someone can do that for me, link to original bios is

https://global-download.acer.com/GDFiles...ER&SC=PA_6



Thanks in advance and please let me know if it is possible to unlock it without bricking the laptop.

Best Regards.

Frank
find
quote
#20
(08-12-2017, 06:17 AM)FrankmNLD Wrote: Good Day.

I have an Aspire VN7-792G-78G4 Nitro black edition with intel i7-6700HQ and Nvidia gtx 960m, Currently running latest bios version 1.09 from Acer website, I would like to unlock advanced menu on this laptop bios,

I would really appreciate if someone can do that for me, link to original bios is

https://global-download.acer.com/GDFiles...ER&SC=PA_6



Thanks in advance and please let me know if it is possible to unlock it without bricking the laptop.

Best Regards.

Frank
Hi
Your bios chip is rewrite protected
Bios mod can be flashed using SPI-programmer+SOIC8 clip only
find
quote


Forum Jump:


Users browsing this thread: 2 Guest(s)