help to convert rom to bin

[uncleseb]

Hi i wan't to convert this rom files to .bin
Can you help me please
Best regard

  R0180D5.rar (Size: 1.97 MB / Downloads: 156)

[BDMaster]

Hi i wan't to convert this rom files to .bin
Can you help me please
Best regard

Hi friend,
file .rom and .bin are the same only difference is between .rom and .wph
(as winphlash file has got an extra header).
So You can rename your file .rom as .bin without any issue !
But I want to say that your Bios is Capsulated so to get that one working ùYou have to cut out some chunks !!!
So avoid to use directly It . . .
Let me know
Regards

[uncleseb]

Hi i wan't to convert this rom files to .bin
Can you help me please
Best regard

Hi friend,
file .rom and .bin are the same only difference is between .rom and .wph
(as winphlash file has got an extra header).
So You can rename your file .rom as .bin without any issue !
But I want to say that your Bios is Capsulated so to get that one working ùYou have to cut out some chunks !!!
So avoid to use directly It . . .
Let me know
Regards

i wan't to flash chipbios with programmer but i can't the size is too high .

The original files .bin is smaller 
  original.bin (Size: 8 MB / Downloads: 71)

[BDMaster]

Hi i wan't to convert this rom files to .bin
Can you help me please
Best regard

Hi friend,
file .rom and .bin are the same only difference is between .rom and .wph
(as winphlash file has got an extra header).
So You can rename your file .rom as .bin without any issue !
But I want to say that your Bios is Capsulated so to get that one working ùYou have to cut out some chunks !!!
So avoid to use directly It . . .
Let me know
Regards

i wan't to flash chipbios with programmer but i can't the size is too high .

The original files .bin is smaller 

Hi friend,
You have to get before Write Original Bios get the FULL_DUMP Firmware from your Eeprom(s)
and then replace Bios Region into It and rewrite the Full Dump file to Eeprom(s) !
So I can Decapsulate Original Bios to prepare, but I need the Full Dump to insert into !
Normaly Bios has many Regions : Descriptor - ME - Bios - GbE - Pdr
So your Eeprom is W25Q64BV 8192 KB and your Bios only 3072 KB It will miss a big chunk ?
Let me know
Regards

Use this tool run It as Admin and upload here the result file :

http://rghost.net/58219938

Regards

It seems You posted the FULL DUMP !!!

Ok friend,
use this one I Regenerated your Firmware replacing your DMI Data so You will find
your laptop UUID, Model, Serial, WIN KEY etc. ready :

http://rghost.net/59439123

Let me know
Regards

P.S. if You appeciate my work Donate to me I will continue . . . look into my Signature

[uncleseb]

Hi , 
it's well it works well !! woww 
i can use recovery disk

I have make donation , you have make a good job !!!

Can you tell me where is windows key and model type in bios ?

Many thanks

[BDMaster]

Hi , 
it's well it works well !! woww 
i can use recovery disk

I have make donation , you have make a good job !!!

Can you tell me where is windows key and model type in bios ?

Many thanks

Many thaks my friend !!!
It's a reply relatively right as if We are considering You Full Dump Firmware these Offset are  :

0x0706040h "SVE1512C6EW"

0x0070D014 "X4N**-43W**-QWB**-QCQ**-*****"

Bu into your Bios Backup :

0x00000040h Model

0x00007014h Serial

Regards

[uncleseb]

Hi,
which software do you use to edit bios ?
best regards

[BDMaster]

Hi,
which software do you use to edit bios ?
best regards

Hi friend,
I use Andy's PMTool 2.59, CodeRush UEFITool 0.19 and some HexEditors and
(last but not least) the marvelous and essential IDA Pro !
That's It ! You can find all this googleing  
Regards

[f-bone]

Hi,
which software do you use to edit bios ?
best regards

Hi friend,
I use Andy's PMTool 2.59, CodeRush UEFITool 0.19 and some HexEditors and
(last but not least) the marvelous and essential IDA Pro !
That's It ! You can find all this googleing  
Regards

Hi guys! Can you please re-upload the final .bin as it has been deleted... no need for model/serial I already extracted that using a programmer and hex editor... after that Im lost

[BDMaster]

Here You go :

http://rghost.net/6KhNwtK28

Regards