Forum RSS Feed Follow @ Twitter Follow @ Twitter

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[REQUEST] Ideapad 300-15ISK Logo Change
#1
Hi guys. I dumped my BIOS using programmer and the SOIC clip. I tried using InsydeH20EZE tool to change the logo. After the flashing of modded BIOS computer booted but as if there was no boot logo. I got only the Windows Splash Screen. I dont know what i am dong wrong. I also prepared several logos for several resolutions. Reason for that is i found many logos inside the BIOS file and could not decide which one of them the BIOS using as a splash logo. Thank you all in advance.

Dumped BIOS: 
.bin   lenovo.bin (Size: 8 MB / Downloads: 2)
LOGOS: 
.rar   NEWLOGO.rar (Size: 21 KB / Downloads: 2)
find
quote
#2
Hi~~
Test this one and give me an feedback what changes on boot logo.
http://www.4file.net/1el8b0kkelj0/lenovo_test.bin.html

My page>>>click
My bios unlock >>> click
donate me >>>click


find
quote
#3
(08-18-2019, 08:34 AM)genius239 Wrote: Hi~~
Test this one and give me an feedback what changes on boot logo.
http://www.4file.net/1el8b0kkelj0/lenovo_test.bin.html

Boot logo now shows my old logo with green 548*300 on top left corner.
find
quote
#4
Try this mod again.
http://www.4file.net/r18xr368t1ko/Ideapa...o.rar.html

My page>>>click
My bios unlock >>> click
donate me >>>click


find
quote
#5
(08-18-2019, 12:12 PM)genius239 Wrote: Try this mod again.
http://www.4file.net/r18xr368t1ko/Ideapa...o.rar.html

Thank youso much. It works. I am going to make a donation to you and to your good work over your site. How did you make it work? I had the same res image. I tried converting the bmp to pcx. It also did not work. Which programs did you use? Can you tell me steps so that i could try? Later i will post a guide for people like me. There are not many guides out there to help us. Again... Thank you.
find
quote
#6
This doesn't need any guide , you can try open my 1st test mod and logo1 mod with H2OEZE then view component > logo , you can know where the correct item of boot logo .

After you flashing my 1st test mod ,you answer me you saw a green 548x308 on top-down left corner.
https://i.imgur.com/rZj0jiB.png

So , i can conform the correct boot logo is this item.
https://i.imgur.com/80KaSEP.jpg

Then transfer lenovo bmp image you provided to tga format and replace original , it's so simple.

My page>>>click
My bios unlock >>> click
donate me >>>click


find
quote
#7
(08-19-2019, 10:07 AM)genius239 Wrote: This doesn't need any guide , you can try open my 1st test mod and logo1 mod with H2OEZE then view component > logo  , you can know where the correct item of  boot logo .

After you flashing my 1st test mod ,you answer me you saw a green 548x308 on top-down left corner.
https://i.imgur.com/rZj0jiB.png

So , i can conform the correct boot logo is this item.
https://i.imgur.com/80KaSEP.jpg

Then  transfer lenovo bmp image you provided  to tga format and replace original , it's so simple.
Questions:
You used H2OEZE to change the logo?
Which program did you use to convert bmp to tga?
Did you use .tga extention or the .icb?
find
quote
#8
1. No , i manual replace image module in bios .
2. Use photoshop save as to [censored].tga.

My page>>>click
My bios unlock >>> click
donate me >>>click


find
quote


Forum Jump:


Users browsing this thread: 1 Guest(s)
Expand chat
Expand chat
Expand chat

To join us in the community live chat, please register or log-in