Forum RSS Feed Follow @ Twitter Follow On Facebook

Thread Rating:
  • 3 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[-]
Welcome
You have to register before you can post on our site.

Username:


Password:





[-]
Latest Threads
[REQUEST] ASUS FX506HM full unlock
Last Post: genius239
Today 08:50 AM
» Replies: 3
» Views: 132
[REQUEST] HP Pro 3500 MT Full unlock
Last Post: Maxinator500
Today 08:34 AM
» Replies: 1
» Views: 84
[REQUEST] Lenovo IdeaPad L340 (BGCNxxWW)...
Last Post: Dudu2002
Today 06:46 AM
» Replies: 27
» Views: 4108
[Request] Sony Vaio Tap11(SVT11217CGW) B...
Last Post: ulrich
Today 05:16 AM
» Replies: 0
» Views: 47
[Request] Correct Bios file name for Len...
Last Post: kruton6
Yesterday 09:01 PM
» Replies: 10
» Views: 1075
[REQUEST] Acer Aspire VN7-791(G) BIOS Un...
Last Post: Dudu2002
Yesterday 04:06 PM
» Replies: 96
» Views: 56842
[REQUEST] Lenovo Thinkpad X230(i) (G2ETx...
Last Post: Dudu2002
Yesterday 04:02 PM
» Replies: 1300
» Views: 288267
possible to upgrade i5 to i7 on ASUS K75...
Last Post: DeathBringer
Yesterday 03:54 PM
» Replies: 1
» Views: 59
Asus Strix G512LV Bios Unlock
Last Post: mikeltxi
Yesterday 01:21 PM
» Replies: 35
» Views: 3599
[Request] Unlock GPU Base Clock Offset l...
Last Post: feluchi
12-03-2021 10:32 PM
» Replies: 3
» Views: 203
[REQUEST] Lenovo IdeaPad S400 (6DCNxxWW)...
Last Post: Dudu2002
12-03-2021 01:35 PM
» Replies: 372
» Views: 66969
[REQUEST] Lenovo G580 (5ECNxxWW) Whiteli...
Last Post: Adrian_D_92
12-03-2021 12:29 PM
» Replies: 2012
» Views: 399681
Unlocked BIOS for Gigabyte Aero 15 Class...
Last Post: Westcoast604
12-03-2021 11:20 AM
» Replies: 3
» Views: 3063
[REQUEST] Lenovo Z50-70 & Z40-70 (9BCNxx...
Last Post: msh20502
12-03-2021 11:02 AM
» Replies: 771
» Views: 130740
Request: Nitro 5 AN515-45-R0B6 BIOS unlo...
Last Post: dnhanhtai0147
12-03-2021 08:51 AM
» Replies: 2
» Views: 139
[REQUEST] Lenovo IdeaPad P400, P500, Z40...
Last Post: Dudu2002
12-03-2021 05:33 AM
» Replies: 698
» Views: 113958
ACER ASPIRE E1-510-4569 BIOS Recovery
Last Post: BlaqueGhost
12-02-2021 10:23 PM
» Replies: 3
» Views: 193
Lenovo M5400 CPU upgrade
Last Post: Biogent
12-02-2021 03:14 PM
» Replies: 33
» Views: 8487
[REQUEST] Lenovo G500 (78CNxxWW) Whiteli...
Last Post: Dudu2002
12-02-2021 02:07 PM
» Replies: 1220
» Views: 186263
[REQUEST] Lenovo Ideapad Z710 (7FCNxxWW)...
Last Post: Dudu2002
12-02-2021 02:05 PM
» Replies: 201
» Views: 48060

[OFFER] Acer Aspire E5-572G Modded Bios
#11
@Tarunshadija

Hi,

yes, you can use this BIOS on your notebook.
Just extract the file I offer (Microcode 21 is the correct version for you) and copy the "Z5WAWX64.FD" file on an (preferably empty) usb-stick.
It needs to have a FAT16/32 file system, but that's what usb-sticks normally have.
Afterwards do the described flash procedure:

1. Copy the BIOS file to an empty and with FAT16/32 formatted usb stick.
2. Unplug the AC adapter.
3. Remove the battery of the notebook - you can unlock the battery on the backside.
4. Plug in the USB flash disk.
5. Press and hold <Fn> and <Esc>, and then plug in the AC adapter while still holding <Fn> and <Esc>.
6. Press the Power button. You can now stop holding <Fn> and <Esc>.
7. The BIOS flash should now begin, the fans will spin up at max speed and the power led should blink. It should take between one to two minutes.
8. After everything is done, you can reinsert the battery and go to the BIOS (F2). There you may want to change some settings (the BIOS flash erases all previously chosen settings).


I recommend you to set the recommended settings I mentioned in the first post after flashing.
As you want to use this notebook as a Hackintosh, also set the following settings:

Main-tab:
Graphic Mode --> Integrated (this disables the dedicated Nvidia graphics card)

Boot-tab:
Secure Boot --> Disabled (otherwise MacOS/Clover probably wouldn't boot, manually adding the bootloader as trusted using the setting "Select an UEFI file as trusted for executing" in the Security-tab may also work)

Also, a setting that may also be relevant is the following:

Advanced-tab:
Video Configuration: Internal Graphic Device: IGD - DVMT Pre-Allocated

This setting controls the fixed memory that is used for the internal graphics card, from what I can see its correctly set for a Hackintosh by default, but adjusting this might be necessary at times.

That should be everything that's necessary BIOS-wise, but I'm not an expert when it comes to Hackintosh (as I don't use one myself).
For everything installation-related there are some forums that can help you with that (in case you didn't know yet):
http://www.insanelymac.com/forum/forum/8...6-project/
https://www.tonymacx86.com/forums/
http://forum.osxlatitude.com/

As far as I can see after doing some research, getting the card reader of this notebook working under OSX isn't possible as of now.
Wifi and Bluetooth depends on the installed card (it seems that Acer used various different ones), but at least the Qualcomm Atheros AR956X card should be okay.
Incompatible wifi- and bluetooth-cards can however be replaced with a compatible one.
Everything else should be possible with some fiddling.

Hope you get this notebook working as a Hackintosh.
Also, sorry for the rather late response, I was quite busy recently.


Edit 01.01.2017:

Some resources I found:
https://github.com/puorc/hackintosh-for-Acer-E5-572G (not available anymore, had configuration for OS X 10.11)
http://www.osxlatitude.com/edp/compatibility/
http://wiki.osx86project.org/wiki/index....-572G-38HC
http://www.osx86.net/files/file/4453-int...y-install/
https://www.tonymacx86.com/threads/help-...2g.160864/
http://www.insanelymac.com/forum/topic/3...r-e5-572g/
https://www.tonymacx86.com/threads/track...es.210693/
find
quote
#12
Hello!

I'm having some issues with this.

My laptop version is E5-572G-75MW, with a Intel Core i7-4712MQ. I added 4GB of RAM to the initial setup (so now I have 8), an SSD, and replaced the hard drive with a faster one. I'm using Windows 10.
I installed the 1.09c - Microcode 21 version, and used the recommended settings.

However, I started getting some (rare) full-computer freezes, where absolutely everything gets frozen, with the only fix being a forced shutdown. There doesn't seem to be a clear direct cause for them, as they happened both when I was doing stuff, but also when I left the laptop idle for a while.
I also started getting some short freezes in games (the kind with repeating sound), which I've never had before on this laptop.

I tried reverting the settings to default, and even switching the BIOS back to stock 1.09, using the provided downloads. However the rare full-freezes continue to this day.

Any ideas?
find
quote
#13
@AzuraMeta

Hi,

flashing the stock BIOS using the recovery flash method will get your BIOS back to default completely. To see whether you successfully flashed the stock BIOS, you can look at the version number in the BIOS. The ModBIOSes have a character after "1.09" while the stock BIOS has not. If you even have these issues with the default BIOS, the problem has to lie somewhere else.
It could either be a software issue or a hardware component that's causing problems.
First off, you may run some stress test tools to see if you can track down the error some more. Some tools that may be useful: Aida64 (can test various things), OCCT (can test CPU and GPU - uncheck AVX when doing the CPU stress test), Memtest86+ (memory stress test), Prime95 (can test various things, but mainly CPU). There are some guides online in regards to using these tools for error locating.
If you can't find anything that way, testing with a freshly installed OS/another OS might be worth a try.

To keep the notebook from overheating while doing stress tests, you could use some tools that force the fan to max speed (only max speed and auto are selectable - have tested the first two and can say that they are working properly):
1 - https://github.com/jaryn-kubik/AcerFanControl (utility that allows temperature-based fan control, Windows)
2 - https://www.dropbox.com/s/4nx8sq7egpdqly...r.rar?dl=0 (modified Aspire 5750G fan control utility by Acer, modified by Gaboros from Acer forum, Windows)
3 - https://github.com/neduard/acer_5750G_fan_maximiser (fan control script for Linux)

A lot of information in regards to fan control that applies to this notebook can be found in this thread: http://community.acer.com/t5/Legacy-Lapt...light/true

Hope you are able to find the cause of your problems!
find
quote
#14
Hello
I managed to write BIOS version 1.09c successfully but now I have a big problem! After some BIOS settings change the laptop no longer boots, blue power LED stay on continuously and nothing happens. I tried to rewrite the BIOS through the crysis procedure FN + Esc but without success (after Fn+Esc + Power button it starts reading from the USB stick), then the fan spins to maximum and remains so even for 15 minutes, until pressing power button (pressing five seconds ) for shutdown or disconnect the AC adapter .
Any advice would be helpful. I opened the laptop in an attempt to reset the bios but can not locate the BIOS chip or CMOS reset jumper.
Also i fail to find the motherboard scheme for this model Acer Aspire E5-572G, on the motherboard of the laptop is the writes : Z5WAW LA-B702P ( it should be the model number,i think .. )
find
quote
#15
@Wollff

Hi,
I'm sorry to hear that.
Which settings did you change and did you apply the recommended settings before that?
Some of the options I recommend can prevent such problems from happening (tested it with some settings) and will redirect you to the BIOS instead if there's a problem.

Specifically these:

Advanced:
ACPI Table/Features Control: TCO WatchDog Support ---> Enabled
ACPI Table/Features Control: WatchDog ACPI Table ---> Enabled
Extended ICC: Use WatchDog Timer For ICC ---> Enabled

Here's a schematic for the motherboard.
You need to short two pins to clear the CMOS on this motherboard, you can find it on page 13 in the schematic with the description "JME1".
I looked for those pins myself at some point, they are beneath the memory modules. So you'll need to take out the memory modules to reach the spot. Hopefully that will be enough to fix the problem.
If it isn't, you'll need to get a chip-flasher and a SOIC8-clip. I have done a chip-flash on this notebook before with a CH341A flasher, so I'd recommend you to get this one (it's rather cheap as well). The type of the BIOS-chip is "cFeon EN25QH64" and it is located near the CPU.
Here's the data sheet of the BIOS-chip.
In that case, you'd need to make a dump of the BIOS-chip with the chip-flasher first. After that you could send it to me and I'd look into creating a BIOS with default settings based on the dump. After flashing it, the notebook should work again.
I'll try to help you in case you don't know how to do it.

Hope you can get your notebook to work again.
find
quote
#16
@mclarke2355
Thank you very much for your help .
Unfortunately I have not been successful to make the laptop boot , but ... what I want to say, is that the modified BIOS is good, the flash operation was easy , and the system booted ok , it was the settings I made (something about memory, selecting an XMP profile 2 since i have a HyperX Impact, 8GB, DDR3, 1600MHz, CL9, 1.35v, 1 stick ) that caused the problem !
Still having trouble visually locating the BIOS-chip (a picture would help) . The CMOS reset did not work (I found two pins - bronze color, beneath memory modules). I will try to buy the necessary tools for rewriting bios . Question ,it is not enough to write a BIOS version from the archive you posted on page 1 (Acer Aspire E5-572G BIOS-ME-EC-FD Collection) ?
And once again thank you for your help .

P.S. Is this good : FLASH CH341A USB to TTL SPI 24 / 25 series ?
find
quote
#17
@Wollff

Oh, that's sad...
Unfortunately I didn't make a photo of the chip location before, but here's a photo of the chip (from the internet).
Looking for the cFeon logo should be the best way, it's the part that is easiest to recognize.
Writing a BIOS from the collection to the chip should work, but you would lose the Mac address of the lan card, Windows key and other numbers that are specific for your notebook (service tag, etc.). Especially the mac adress could cause problems when you want to connect your notebook over ethernet. With the dump of the chip we should be able to preserve these things.
That flasher should be okay. Just be sure to get a SOIC8 clip (example) as well.
find
quote
#18
(02-23-2017, 11:08 AM)PWollff Wrote: @mclarke2355
Thank you very much for your help .
Unfortunately I have not been successful to make the laptop boot , but ... what I want to say, is that the modified BIOS is good, the flash operation was easy , and the system booted ok , it was the settings I made (something about memory, selecting an XMP profile 2 since i have a HyperX Impact, 8GB, DDR3, 1600MHz, CL9, 1.35v, 1 stick ) that caused the problem !
Still having trouble visually locating the BIOS-chip (a picture would help) . The CMOS reset did not work (I found two pins - bronze color, beneath memory modules). I will try to buy the necessary tools for rewriting bios . Question ,it is not enough to write a BIOS version from the archive you posted on page 1 (Acer Aspire E5-572G BIOS-ME-EC-FD Collection) ?
And once again thank you for your help .

P.S. Is this good : FLASH CH341A USB to TTL SPI 24 / 25 series ?
Disconnect Battery, and CMOS battery (if it possible), unplug all RAM modules.
Then do Power Flee by pressing power button 20 secs or so.
Then connect AC, Power on, it will bootloop cos no ram installed.
- in one of the shutdown in-between bootloop , quickly connect CMOS battery connector back in its place. Let it reboot,
- it will shutdown again cos still no ram installed,
- after another shutdown ( still in-between bootloop ) quickly connect/insert 1 ram modules to its placed.
Then after next reboot it should back to life to enter Setup Mode. Then you could load Default Settings and restart or shutdown to connect battery and another ram modules, if you had 2 slots installed.
find
quote
#19
Hello,
@mclarke2355
I managed to buy the necessary stuff and now I need some help (a lot of help actually ) . First, with what program I can edit/read/modify the bios file that I will copy from the chip . Secondly, where exactly in the entire string of bios file are the memory settings Memory Overclocking / DIMM Profile (XMP) ; Memori\y Reference Clock ; Memory Ratio ; because these were changed . So the following sections : overclocking memory / DIMM Profile (XMP) + Memory + memory clock ratio referince - need to be restore to defaults !
Thank you in advance .
find
quote
#20
Hello,

have you tried the method that heltrix wrote about already?
I've read that some people successfully used that method to revert the settings back to default.

If that doesn't work, you'll first need to get a backup of the current BIOS from the chip.
You can use this software. Before you can use it, you'll need to install the drivers from the according folder.
Be sure to use the verify function as it is very important that the BIOS-dump is correct.
To extract the BIOS, we can use UEFITool or PhoenixTool.
I'll look into the specifics when I have some more time (this weekend probably).
find
quote


Forum Jump:


Users browsing this thread: 1 Guest(s)