Forum RSS Feed Follow @ Twitter Follow On Facebook

Thread Rating:
  • 2 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[-]
Welcome
You have to register before you can post on our site.

Username:


Password:





[-]
Latest Threads
[REQUEST] Lenovo Yoga 2 Pro (76CNxxWW) W...
Last Post: Dudu2002
Today 10:53 AM
» Replies: 845
» Views: 317071
[REQUEST] Lenovo Thinkpad E130 (H4ETxxWW...
Last Post: Dudu2002
Today 10:51 AM
» Replies: 509
» Views: 101052
[REQUEST] Lenovo Yoga 11E (N15ETxxW) Whi...
Last Post: Dudu2002
Today 08:15 AM
» Replies: 5
» Views: 2517
[REQUEST] Lenovo G50-70 (9ACNxxWW) BIOS ...
Last Post: Dudu2002
Today 07:23 AM
» Replies: 139
» Views: 40959
[REQUEST] CPU Support for Ryzen 5 3600 o...
Last Post: flexpavillion
Today 04:32 AM
» Replies: 1
» Views: 335
Clevo P775TM1-G BIOS
Last Post: ActivatedNut
Today 01:36 AM
» Replies: 145
» Views: 55304
ASUS P5G41T-M LX2/GB Unlocked Hidden Ove...
Last Post: GangsteR23
Yesterday 04:58 PM
» Replies: 25
» Views: 64129
lenovo z570 Advanced Menu Unlocked
Last Post: Kaluva12345
Yesterday 04:58 PM
» Replies: 7
» Views: 4095
[Request] HP Elitebook 6930P WLAN Whitel...
Last Post: Maxinator500
Yesterday 02:25 PM
» Replies: 15
» Views: 6566
Lenovo ThinkCentre M715q 2nd Gen & AMD R...
Last Post: RedfieldHUN1987
Yesterday 09:23 AM
» Replies: 2
» Views: 143
L14 Gen 3 AMD , Need UEFI unlock advance...
Last Post: frankeinstein2532555
Yesterday 04:08 AM
» Replies: 0
» Views: 89
[REQUEST] Lenovo Y400 & Y500 (6BCNxxWW) ...
Last Post: freedome
03-26-2024 11:00 PM
» Replies: 188
» Views: 52171
[REQUEST] Lenovo G510 (79CNxxWW) Whiteli...
Last Post: ghostinoss
03-26-2024 09:21 PM
» Replies: 655
» Views: 167140
[Request] CPU support for Lenovo IQ57I
Last Post: DeathBringer
03-26-2024 10:02 AM
» Replies: 5
» Views: 237
unlocked Bios for Machenike s16
Last Post: Dudu2002
03-26-2024 09:06 AM
» Replies: 5
» Views: 325
[REQUEST] Bios Unlock Whitelist HP DV6-6...
Last Post: DimanTLT63
03-26-2024 03:03 AM
» Replies: 0
» Views: 139
[REQUEST] HP Pavilion G6-1252ss Whitelis...
Last Post: joseefitness
03-26-2024 01:40 AM
» Replies: 0
» Views: 125
[REQUEST] Lenovo S310 & S410 (8BCNxxWW) ...
Last Post: morgley
03-25-2024 10:43 PM
» Replies: 14
» Views: 6331
Acer Nitro ANV15-51 Bios Bin File Reques...
Last Post: Papethzkie23
03-25-2024 06:04 PM
» Replies: 0
» Views: 137
[REQUEST] Lenovo G710 BIOS Whitelist Rem...
Last Post: si1975
03-25-2024 01:28 PM
» Replies: 468
» Views: 125407

Sabertooth X58 Bios mod
#81
I made a filter on their website which is compatible with X58, I just want to ask you guys opinion which would be the right choice for my PC?
https://www.gskill.com/en/finder?cat=31&...hannel+Kit
find
quote
#82
(12-08-2018, 05:24 AM)ValeRO Wrote: I made a filter on their website which is compatible with X58, I just want to ask you guys opinion which would be the right choice for my PC?
https://www.gskill.com/en/finder?cat=31&...hannel+Kit

1600mhz cas-9 is the high end for the X58 chipset.  you do not need any faster. 

I suggest staying with your current memory kit.  just install it in 2xdual channel and configure timings/speed manually.  That 'compatibliity' statement just means the XMP profile was not setup for x58.  the ram is still "compatible", just not optimized for the x58.
find
quote
#83
X58 kits are usually cheap on ebay, easy to spot too because it's always 3x2GB or 3x4GB. You don't have to get X58 memory, but it may be better solution, we may be able to get stable if you'll let me help you adjust the settings I've been talking about all along.

@pir8man - Cas 9 is low end for X58 Big Grin I have plenty of Cas 6 and Cas7 or 8 kits for X58. As for speed, most generally was 1600-1866 back then for top end, but there is some 2000-2133 kits too but those need special skills (Tinkering, tweaking etc) to run stable usually Smile

From those you linked, I would try to find one of these (I check each link on G.Skill site, and QVL shows compatible with Asus X58 for these, and in general any kit 3x is designed for X58)
F3-12800CL9T-12GBRL Same
F3-12800CL8T-12GBRM (Second choice)
F3-12800CL9T-12GBSR Same
F3-12800CL7T-12GBSR (Best kit)

I had a quick look on ebay for 3x4GB and found these
$45 OBO - 1333Mhz G.Skill - https://www.ebay.com/itm//183573327399
$53 right now, ends in 20 hours 1600Mhz - https://www.ebay.com/itm/192745089337
$60 - 1600Mhz Patriot - https://www.ebay.com/itm/173637279335
$63 1333Mhz Crucial - https://www.ebay.com/itm/372517095630
$69.95 1333Mhz G.Skill (Black Ripjaw V1) - https://www.ebay.com/itm/202509678849
$73 1600Mhz Crucial - https://www.ebay.com/itm/153227179442
$74.99 1600Mhz Mushkin - https://www.ebay.com/itm/132878011013
$77 1600Mhz Corsair Blue Vengeance - https://www.ebay.com/itm/292804741862

3x2GB
$10 bid + $3 ship or $25 buy it now, ends in 10 hours - Corsair https://www.ebay.com/itm/312349850057
$23 shipped 1333Mhz Kingston - https://www.ebay.com/itm/233036150332
$27 bid or make offer 1800Mhz Kingston HyperX T1 (With fan) - https://www.ebay.com/itm/264071633067
$29.97 1333Mhz G.Skill - https://www.ebay.com/itm/143044134819
$29.99 bid (zero biders) ends in 22hours - Buyt it now $60 1866Mhz Corsair - https://www.ebay.com/itm/202522648716
$30 Ships from HK 1333Mhz G.Skill (2x Sets available) - https://www.ebay.com/itm/183422443223
$30 ships from HK 1600Mhz G.Skill (2x Sets available) - https://www.ebay.com/itm/183457849102
find
quote
#84
(12-08-2018, 12:53 PM)Lost_N_BIOS Wrote: X58 kits are usually cheap on ebay, easy to spot too because it's always 3x2GB or 3x4GB.  You don't have to get X58 memory, but it may be better solution, we may be able to get stable if you'll let me help you adjust the settings I've been talking about all along.

@pir8man - Cas 9 is low end for X58 Big Grin  I have plenty of Cas 6 and Cas7 or 8 kits for X58.  As for speed, most generally was 1600-1866 back then for top end, but there is some 2000-2133 kits too but those need special skills (Tinkering, tweaking etc) to run stable usually Smile
yes, there is faster, but testing showed that gains were minimal above 1333 cas-9. and 1600 cas-9 is considered better than optimal for this chipset.
you can get faster, the system will only show synthetic performance gains.

I had ddr-2000 on this board at one time, but I ran it at 1600mhz with tightest possible timings.  I did have it up to 1833 at one time, but this required too much voltage to the MCU, so I backed down to 1600 and optimized the timings.  It ran superb until I rebuilt/retasked my R3E system.


If you are looking to invest, upgrade your CPU to W3690. These are selling on ebay for about $75 currently. This will upgrade your MCU from stock 1066 dram support to stock 1333 dram support. It also allows for 1.5x uncore multiplier, instead of the 2x that your 950 requires. Lower uncore multiplier usually means less voltage & heat, so you can run those high end ram modules. This is the xeon equivalent to 980x. That would get you way more performance than any memory swap you do.
find
quote
#85
Synthetic benchmarks show good gains at higher speeds yes (Same for lower CAS, tWCL), not so much in real world is visible, that is true for the most part, but it does help in games and with graphics in general too.

CAS 9 is still considered low end, CAS6 or CAS7 blows CAS9 away in any benchmark at same speeds. Just look at your own comment, I had 2000Mhz CAS whatever, but I ran it at lower speed for the ideal tighter timings (Better/Lower CAS) 2000Mhz CAS 8/9/10 will loose out any day to 1600 CAS6 or CAS7, CAS 6-8 was the standard when X58 launched with CAS6 being the top tier modules and CAS8 being the now standard CAS9/10 because they don't make any high end IC's for low CAS anymore due to DDR3 production phasing down.

None of this applies to his issue though, and yes I agree, I'd rather purchase a better CPU than more memory and more memory is really not needed here either, only to optimize the timings manually for X58 instead of the X79 they were designed for @ tRFC, tFAW, tRRD)

I was not trying to get him into better timings, or more speed etc, only trying to get him stable. I only replied to your comments about dual vs triple channel, or CAS vs CAS, speeds etc in regards to our general discussion about that, nothing to do with his system or stability.
find
quote
#86
hello all x58 fans :Smile just buildt a computer with the asus sabretooth x58 (1402) and a xenon5675, 12 gig ram, and a dead slow hdd

i would like to add a ssd to boot from, but i read that the m2 evo 970 (and others) has problems booting from this board?..is there any bios mod to fix that?
find
quote
#87
(12-09-2018, 02:40 AM)Lost_N_BIOS Wrote: Synthetic benchmarks show good gains at higher speeds yes (Same for lower CAS, tWCL), not so much in real world is visible, that is true for the most part, but it does help in games and with graphics in general too.  

CAS 9 is still considered low end, CAS6 or CAS7 blows CAS9 away in any benchmark at same speeds.  Just look at your own comment, I had 2000Mhz CAS whatever, but I ran it at lower speed for the ideal tighter timings (Better/Lower CAS)  2000Mhz CAS 8/9/10 will loose out any day to 1600 CAS6 or CAS7, CAS 6-8 was the standard when X58 launched with CAS6 being the top tier modules and CAS8 being the now standard CAS9/10 because they don't make any high end IC's for low CAS anymore due to DDR3 production phasing down.

None of this applies to his issue though, and yes I agree, I'd rather purchase a better CPU than more memory and more memory is really not needed here either, only to optimize the timings manually for X58 instead of the X79 they were designed for @ tRFC, tFAW, tRRD)

I was not trying to get him into better timings, or more speed etc, only trying to get him stable.  I only replied to your comments about dual vs triple channel, or CAS vs CAS, speeds etc in regards to our general discussion about that, nothing to do with his system or stability.

Hello m8

Do any of you guys know about memory problems on the x58 sabertooth boards on the latest 1402 bios ?

My board will not show the memory installed in slot B1. If i install 4gb in A1 and 4gb in B1 only the 4gb from A1 will show up in Bios and in Win10 ,however in cpuz it shows 8gb ?

I just got this board and it was already updated to bios 1402, so i cant tell if it had the same problem before

Regards Chris
find
quote
#88
This is caused by a few things, first check CPU socket pins, if you are not sure post some images from a few angles for people to help you look.
Second can be CPU heatsink too tight, if not push-pin type. Third can be physical damage to the board, missing resistors, scratched PCB or traces etc. And finally can be settings, speed/timings/voltages, mentioned last because you only mentioned having too sticks so this shouldn't be such a big problem.

Also, be sure to check your manual for correct memory slots to use when only two sticks installed, X58 can cause problems if not using proper slots, and look at the images vs what it shows to be 100% sure you have the correct slots vs what you think they are labeled as. Sounds like you have this correct, so probably not the issue (second and forth slot from CPU for two sticks). So, check above things instead.
find
quote
#89
Photo 
(03-06-2019, 11:23 AM)Lost_N_BIOS Wrote: This is caused by a few things, first check CPU socket pins, if you are not sure post some images from a few angles for people to help you look.
Second can be CPU heatsink too tight, if not push-pin type.  Third can be physical damage to the board, missing resistors, scratched PCB or traces etc.  And finally can be settings, speed/timings/voltages, mentioned last because you only mentioned having too sticks so this shouldn't be such a big problem.

Also, be sure to check your manual for correct memory slots to use when only two sticks installed, X58 can cause problems if not using proper slots, and look at the images vs what it shows to be 100% sure you have the correct slots vs what you think they are labeled as.  Sounds like you have this correct, so probably not the issue (second and forth slot from CPU for two sticks).  So, check above things instead.

Hi m8

Thx so much for the fast reply, i just took a picture with my camera on macro, and guess what ;-)  there is one bend pin.
I will add the picture after dinner, i hope this solves the problem.
Its really appreciated that you are investing some of your time into helping others

Regards Chris
find
quote
#90
You're welcome, if I was there I'd fix for you too! Big Grin

If you have good steady hands, and good eyesight, then you "may" be able to correct the pin with an empty mechanical pencil barrel or a needle. Only attempt this if you have both of the above (Good sight, and steady hands), otherwise you can easily break off the pin, pin tip, or bend/break other pins around the bent one. All that depends on how badly, and how the pin is bent.
find
quote


Forum Jump:


Users browsing this thread: 2 Guest(s)