Nice news !!! Could You share this knowledgment with us ?
Would You post the Guide to get It working ?
I will prepare quickly the Bios Mod !
Let me know
Regards
I have two plan for it
Plan A(cheap & online dump & flash bios):
CH341A USB EPROM chip Burner Programmer(for TTL 3.3v)¥21 RPC RMB=$ 3.5 Dollar
[
attachment=8177]
SOP8 Flash Chip IC Test Clips ¥31 RPC RMB=$ 5.2 Dollar
[
attachment=8178]
--------------------------------------------
XTW100 USB EPROM chip Burner Programmer ¥25 RPC RMB=$ 4.2 Dollar
[
attachment=8179]
SOP8 to DIP8 IC Adpater ¥9.5 RPC RMB=$ 1.6 Dollar
[
attachment=8180]
Plan B(expensive)
MXIC MX25L3206EM2I-12G SOP8 (I got 10 pieces)¥0.9 RPC RMB *10=$ 1.5 Dollar
MXIC MX25L6406EM2I-12G SOP8 (I got 10 pieces)¥2.2 RPC RMB *10=$ 3.7 Dollar
Minipro TL866CS USB Universal EEPROM Programmer 通用编程器¥195 RPC RMB=$ 32.5 Dollar
Atten AT852D Solder Station安泰信AT852D热风枪¥287 RPC RMB=$ 48.2 Dollar
CP-2015 2.0MM solder wick吸锡条 ¥2.2 RPC RMB=$ 0.37 Dollar
[
attachment=8181]
Solder Wire焊锡
flux brush焊剂
New WiFi Adapter to be installed:
Model:Broadcom BCM94360CD 802.11ac mini WLAN + Bluetooth 4.0 Wireless card + MINI PCI-E Adapter
[
attachment=8182]
I follow the thread:
https://www.bios-mods.com/forum/Thread-T...ware-Flash
To BDMaster:
whether I Flash 2.63 BIOS first
then dump BIOS from EEPROM Programmer
Send to you , you will give me a .ROM file for NWL
I pack it in .SL1 Files and rebuild BIOS ROM
finally,i use this file flash MXIC on EEPROM Programmer
Hi,
i flashed my bios some days ago, with your plan A equipment (CH341A + Testclip).
You only have to readout the EEPROM(s) and post it right here.
The patched File can be directly flashed with the CH341A Programmer.
Greetings
ZabbensX
(03-25-2015, 12:10 PM)ZabbensX Wrote: [ -> ]Hi,
i flashed my bios some days ago, with your plan A equipment (CH341A + Testclip).
You only have to readout the EEPROM(s) and post it right here.
The patched File can be directly flashed with the CH341A Programmer.
Greetings
ZabbensX
I used CH341A + Testclip to dump bios online.
but i find the bin files dumped can't open with phoenixtool259 ,The files contain nothing.
How you did ?And which's your Program?
If tomorrow i still can dump the bios,i will use Atten AT852D Solder Station to finish it.
I think You have to use the Solder Station !
Regards
I have done dump bios by ch341a & minipro finally
(03-25-2015, 12:10 PM)ZabbensX Wrote: [ -> ]Hi,
i flashed my bios some days ago, with your plan A equipment (CH341A + Testclip).
You only have to readout the EEPROM(s) and post it right here.
The patched File can be directly flashed with the CH341A Programmer.
Greetings
ZabbensX