Bios Mods -The Best BIOS Update and Modification Source

Now I have unlocked version of 1.13. Can I use some1 else unlocked 1.14 or do I have to first update mine to 1.14 and than get my own unlock?

(12-08-2014, 01:08 PM)aimhigh_swe Wrote: [ -> ]

(12-08-2014, 12:11 PM)hobbit7624 Wrote: [ -> ]Guys could you please tell me which PCI card is compatible with Lenovo y50 ? the card in the locking has only one big [censored] compared to the traditional. Any help would be appreciated thanks

I had to get a m.2 version of the Intel ac 7260. I ordered wrong one first.

You can see both versions in this link:'http://www.intel.se/content/www/se/sv/wireless-products/dual-band-wireless-ac-7260-bluetooth.html'

I bought the one with 2 connectors first, but had to get a hold of the m.2 version (the one with 1 big and 2 small connectors).

Hope i understood your problem correct and this was the info you where looking for.

Man your a life saver. Thanks for helping me out.....

One last thing the back cover of my laptop i cannot seem to get it open. I tried to lift in from bottom and tried to push forward, but the hing wont snap. I dont want to break it apart :p

Maybe you have some hints ?

(12-09-2014, 09:13 AM)hobbit7624 Wrote: [ -> ]

(12-08-2014, 01:08 PM)aimhigh_swe Wrote: [ -> ]

(12-08-2014, 12:11 PM)hobbit7624 Wrote: [ -> ]Guys could you please tell me which PCI card is compatible with Lenovo y50 ? the card in the locking has only one big [censored] compared to the traditional. Any help would be appreciated thanks

I had to get a m.2 version of the Intel ac 7260. I ordered wrong one first.

You can see both versions in this link:'http://www.intel.se/content/www/se/sv/wireless-products/dual-band-wireless-ac-7260-bluetooth.html'

I bought the one with 2 connectors first, but had to get a hold of the m.2 version (the one with 1 big and 2 small connectors).

Hope i understood your problem correct and this was the info you where looking for.

Man your a life saver. Thanks for helping me out.....

One last thing the back cover of my laptop i cannot seem to get it open. I tried to lift in from bottom and tried to push forward, but the hing wont snap. I dont want to break it apart :p

Maybe you have some hints ?

I don't know your laptop and don't know if It get a lock switch on front, but if It so, You can use a little blade to glide to right the hooks unlocked.
They are connected to a spring and are mobiles.
Better lo download the Hardware Maintenance Guide and look of there.
Regards

(12-09-2014, 05:36 AM)jezior_lca Wrote: [ -> ]Now I have unlocked version of 1.13. Can I use some1 else unlocked 1.14 or do I have to first update mine to 1.14 and than get my own unlock?

Upload new Bios Backup and I will prepare for You.
Using other Bios Mod You will clone the user's Laptop on your !
Regards

(12-09-2014, 09:13 AM)hobbit7624 Wrote: [ -> ]

(12-08-2014, 01:08 PM)aimhigh_swe Wrote: [ -> ]

(12-08-2014, 12:11 PM)hobbit7624 Wrote: [ -> ]Guys could you please tell me which PCI card is compatible with Lenovo y50 ? the card in the locking has only one big [censored] compared to the traditional. Any help would be appreciated thanks

I had to get a m.2 version of the Intel ac 7260. I ordered wrong one first.

You can see both versions in this link:'http://www.intel.se/content/www/se/sv/wireless-products/dual-band-wireless-ac-7260-bluetooth.html'

I bought the one with 2 connectors first, but had to get a hold of the m.2 version (the one with 1 big and 2 small connectors).

Hope i understood your problem correct and this was the info you where looking for.

Man your a life saver. Thanks for helping me out.....

One last thing the back cover of my laptop i cannot seem to get it open. I tried to lift in from bottom and tried to push forward, but the hing wont snap. I dont want to break it apart :p

Maybe you have some hints ?

Yeah it was hard the first time to snap, actually think i broke a little plastic bit of (very small in that case, didnt find it). I hear you lift it abit, then push it away (the bit that locked for me was just where the screen is attached). Theres a couple youtube videos of ppl openeing it and showing how its supposed to be dine (didnt help me thou hehe)

Even if i did broke something the lid still fits perfectly, cant see any difference.

Also be careful with the screws, use a very good and perfect fit screwdriver, screws are soft and can be easily be flatttened with big screwdriver with bad fit to the [censored]. Not super easy, but still dubble check your equipment so its a good fit


Also on my modified bios v1.14 now, working like a clock and getting impressive dual band speeds now, next thing is to get my AC router! This was the only [censored] party about my y50-70, loving it like a baby now with the wifi fixxed!

Hello BDMaster
Could you please help me to remove whitelist from my Lenovo Y50 to install my new 7260NGW R wifi card?
Here is my bios 1.14 backup File.
http://ul.to/tsl9dsbg
And please tell me what tool that I have to use to upgrade my bios with the new ROM provided by you.
Thank you so much.

Hi BDMaster, here is my Y50-70 BIOS backup file... would you please help me whitelist my BIOS for the wifi card issue. Thanks.



https://www.sendspace.com/file/56ccou

Can you please remove whitelist so I can install 7260 and also enable advanced bios menu for Y50-70 4k v1.14?

https://www.sendspace.com/file/0r0h3j


Thanks! Donation will definitely becoming your way if this works!

Hello, I would like to remove the BIOS whitelist and unlock the advanced menu so I can use my new wireless adapter.

Result File
https://www.sendspace.com/file/nm1vxk

Universal BIOS backup
https://www.sendspace.com/file/w3qsad

Hi,
I need some help...
So, I stack together laptop from old parts, most of them are from Toshiba satellite L350-147 (LCD, housing)...but motherboard is from Toshiba l300-17o. Visible difference is in screen size, l300 is 15", and L350 is 17", and MBOs are exactly the same (at least regarding dimensions, connectors....), so the Frankenstein laptop (after replacing NEC/TOKIN capacitor on MBO) starts to work (great, right?). The only bad thing is that the 105key keyboard acts like it is 85 key keyboard... A friend of my said "there is a numb-lock option in BIOS", so i have search for it, but there is no such option, I have insyde BIOS 1.5 version (MBO Part number: PSLB0E-06U015G3), I was looking and it seams to be the last update...and no numb-lock option in BIOS... So I have tried to turn numpad with Fn+F11, numlock led turns on but numeric pad is not working, and I have found that numbers are allocated across leathers [m j k l u i o 7 8 9 ] and not over the numpad ...

So, the big question is, is it possible to update l300 with modded BIOS where 105key keyboard would function in proper way?
If answer is "yes" please direct me in what to search for, and what to learn more to make keyboard work as expected.

Thank You in advance for answers and feedback.