Bios Mods -The Best BIOS Update and Modification Source

(10-30-2015, 03:47 PM)BDMaster Wrote: [ -> ]Hi mate,
I know them
So what about that ?
Regards

Nothing.

Hi,

I would like to get my newly bought Intel® Dual Band Wireless-AC 7260 to function which is mounted in my laptop. I have currently disabled wireless card in BIOS, in order to get my computer running (as it would detect that network card is unauthorized).

Manufacturer: Lenovo
Model: y50-70 20378
Bios revision: 9ECN44WW (V3.04)

Link to report aswell as bios-backup: http://rghost.net/7jHBK87Ht
Many thanks in advance!

Here You go :

http://rghost.net/6TMJNwSvs

let me know
Regards

Donate to me for my work and time . . . look into my Signature
You have to follow this step :

1. Downgrade to 1.13 or 1.14
2. Boot to Windows
3. Use Sleep Bug to flash Bios Mod
4. Flash using this mode :

Unpack the Bios Mod and copy the "modified" folder into C: HD root place !
Then open Command Promt with Admin Rights (CLI window C:\), put your laptop
into Sleep Mode (just close the Lid) and then Wacke-Up It (reopen the Lid),
after this execute these comands from CLI window :

cd \

cd modified

fptw -f bios.bin -bios

(or fptw64 for Windows x64)

Let me know
Regards


Your Brain . . . . It's the best tool U can use ! Wink

Hi BDMaster,

Thanks for fast reply. I followed your guide to 100% but unfortunately I was ending up with this result below.
Can you please check? I will donate ofcourse, thanks in advance.

-------

C:\Modified>fptw64 -f bios.bin -bios

Intel ® Flash Programming Tool. Version: 9.5.14.1724
Copyright © 2007 - 2013, Intel Corporation. All rights reserved.

Platform: Intel® HM86 Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid

--- Flash Devices Found ---
W25Q64BV ID:0xEF4017 Size: 8192KB (65536Kb)

PDR Region does not exist.
GBE Region does not exist.

Error 28: Protected Range Registers are currently set by BIOS, preventing flash access.
Please contact the target system BIOS vendor for an option to disable Protected Range Registers.

Have You Downgraded to version 1.13 or 1.14 before doing the Flash ?
It will unlock the Eeprom Chip , then using Sleep Mode We can bypass Error 28.
Unpack the Bios Mod and copy the "modified" folder into C: HD root place !
Then open Command Promt with Admin Rights (CLI window C:\), put your laptop
into Sleep Mode (just close the Lid) and then Wacke-Up It (reopen the Lid),
let me know
Regards

(11-02-2015, 05:39 PM)BDMaster Wrote: [ -> ]Have You Downgraded to version 1.13 or 1.14 before doing the Flash ?
It will unlock the Eeprom Chip , then using Sleep Mode We can bypass Error 28.
Unpack the Bios Mod and copy the "modified" folder into C: HD root place !
Then open Command Promt with Admin Rights (CLI window C:\), put your laptop
into Sleep Mode (just close the Lid) and then Wacke-Up It (reopen the Lid),
let me know
Regards

Yes BDMaster, I did downgrade to 1.14, maybe I failed sleep mode-process somehow or it's simply not possible to do this in Windows (in my case).
However, I formatted USB-stick with bootable DOS in addition with your folder "modified", I got same error message when I ran flash.bat but I pressed enter once again and now I have unlocked BIOS and functional intel-wifi 5ghz with 300mbps instead of 72 mbps.

Thanks a lot BDMaster!! Donate has been given.

Hi BDMaster,

could you please help me out with this one and remove the whitelist?

Here's my file https://www.sendspace.com/file/n6cl0o

Thank you!

Sten

Here You go :

http://rghost.net/7wsNbQMk5

let me know
Regards

Donate to me for my work and time . . . look into my Signature

P.S. Follow instructions included as You have to Downgrade to v. 1.13 or 1.14
to unlock the Eeprom Chip and then Flash this Bios Mod over It !

(11-05-2015, 04:38 AM)BDMaster Wrote: [ -> ]Here You go :

http://rghost.net/7wsNbQMk5

let me know
Regards

Donate to me for my work and time . . . look into my Signature

P.S. Follow instructions included as You have to Downgrade to v. 1.13 or 1.14
to unlock the Eeprom Chip and then Flash this Bios Mod over It !

Works like a charm, you´re the man!

Transferred couple of beers too via PayPal, thanks a lot.

Sten

I need the answer, I have the same problem. My laptop not start. Display off, but the keyboard is turn light. I don't know what do. Sorry for my bad english.

Quote

BDMaster [458]
(10-16-2014, 05:59 AM)guccia123 Wrote:
I have unlocked bios with this tool. Then undervolted CPU and now laptop won't start. Keyboard led comes on, fan starts spinning, but there is no signal from display. Already tried removing battery, cmos battery, pushing power button for 30 sec, but no help. Is there any way to force bios reset or is there clear cmos jumper on this laptop ?


Hi friend,
I replied on PM !
Regards